7 Series DPO

Breakthroughs Begin here

back to home
Bandwidth ranging from 8-25 GHz, 4 Analog Channels

7 Series DPO
Digital Phosphor Oscilloscope

The 7 Series DPO delivers unparalleled signal fidelity, high ENOB, low noise, low jitter, fast measurement throughput, and an award-winning TekScope® user interface making it ideal for meeting the evolving needs of high-speed serial, high-energy physics, and key RF applications.

Bandwidth ranging from 8-25 GHz and compatible with TekConnect™ probes.

Bandwidth

Sample Rate

Record Length

Vertical Resolution
Up to 25GHz Up to 125 GS/s Up to 2 G 10 bits
Download datasheet
Product Overview
tek-dpo714ax front
tek-dpo714ax side
tek-dpo714ax back
tek-dpo714ax handle

Overview

Performance oscilloscope with low noise and high fidelity signal acquisition

With up to 25 GHz analog bandwidth, the 7 Series DPO provides the most accurate real time performance in its class:

  • Low vertical (random) noise with high ENOB
  • Fast throughput with 10 Gb Ethernet LAN SFP+ port
  • Delightful, yet familiar built-for-touch UI and TekScopeTM software, available with either embedded (Linux) or Windows OS

The 7 Series’ low noise, high fidelity signal acquisition is critical for high bandwidth applications such as:

  • Advanced research & investigation of transient phenomena
  • Digital design & validation including signal integrity, jitter, and timing analysis
  • Memory bus analysis and debug
  • Compliance testing and debug of high speed serial interfaces for industry standards
  • Analysis of signal integrity and power integrity in artificial intelligence data center development
  • Spectral analysis of transient or wide-bandwidth RF
 
Key performance specifications

.

Input channels
  • 4 TekConnect® each with TCA292D 50 Ω 2.92 mm input adapter
  • 1 Aux In (TekConnect) with TCA292D 50 Ω 2.92 mm input adapter
Bandwidth (all analog channels)
  • 8 GHz, 10 GHz, 13 GHz, 16 GHz, 20 GHz, 25 GHz (upgradable)
Sample rate (all analog channels)
  • Real-time: 125 GS/s
  • Interpolated: 12.5 TS/s
Record length (all analog channels)
  • 500 Mpoints standard
  • 1 or 2 Gpoints optional
Vertical resolution
  • 10-bit ADC with high ENOB
Noise Reduction
  • QuietChannel™ technology with Active CTLE (Continuous Time Linear Equalization) with 7 boost settings and one-button optimization routine which selects the optimal setting for the input signal to compensate for high-frequency signal channel loss.
Horizontal
  • Precision timebase with low intrinsic jitter.
Pinpoint® digital triggering to full bandwidth
  • Allows selection of virtually all trigger types on both A and B trigger events delivering the full suite of advanced trigger types for finding sequential trigger events
  • Edge, Pulse width, Timeout, Runt, Window, Cycle, Rise/Fall Time, Visual Trigger
Low-latency Aux In analog triggering
  • <20 ns from trigger in on Aux In and Ch1 to Aux Out BNC on rear panel.
Probing
  • P7700 & P7600 TriMode™ probing system – perfectly matched signal connectivity, with calibration to the probe tip
  • TCA292D TekConnect™ Adapter
Standard analysis
  • Cursors: Waveform, V Bars, H Bars, V&H Bars
  • Measurements: 36
  • Plots: Time Trend, Histogram, Spectrum, and Phase Noise
  • Math: Basic waveform arithmetic, FFT, and advanced equation editor
  • Search: Search on any trigger criteria
  • Jitter: TIE and Phase Noise
Optional analysis
  • Advanced Jitter and Eye Diagram Analysis (Opt 7-DJA)
  • Signal Integrity Modeling for Embedding/De-embedding and Equalization (Opt 7-SIM, Opt 7-SIMA)
  • User-defined filtering (Opt 7-UDFLT)
  • Mask/Limit Testing (Opt 7-MTM)
  • Time Domain Reflectometry (Opt 7-TDR)
  • Advanced Vector Signal Analysis (SignalVu-PC)
Optional compliance, protocol trigger, decode, and search
  • PCIe, USB, DisplayPort, DDR and many other supports – refer to Ordering Information for complete list of supports
Arbitrary/Function Generator (Opt 7-AFG)
  • 100 MHz waveform generation
  • Single-ended and differential
  • Waveform Types: Arbitrary, Sine, Square, Pulse, Ramp, Triangle, DC Level, Gaussian, Lorentz, Exponential Rise/Fall, Sin(x)/x, Random Noise, Haversine, Cardiac
Trigger frequency counter (free with product registration)
  • 11-digit
Display
  • 15.6 inch (396 mm) TFT color
  • High Definition (1,920 x 1,080) resolution
  • Capacitive (multi-touch) touchscreen
Compute and storage
  • 12-core processor, 96 GB System RAM
  • ≥ 1.6 TB removable NVMe SSD (solid state drive)
  • Std SSD: Closed Embedded OS, Opt SSD: Windows 10
Connectivity
  • LAN (10G Ethernet on SFP+ and 10/100/1000 Base-T Ethernet on RJ-45)
  • USB 3.0 Host (3 front & 4 rear), USB 3.0 Device (1 port rear)
  • DisplayPort, HDMI
  • Sample Clock In/Out, Ext Ref In, Ref Clock Out, Sync In/Out, Aux Out
e*Scope®
  • Remotely view and control the oscilloscope over a network connection through a standard web browser
Dimensions
  • 12.9 in (327 mm) x 22.1 in (560 mm) x 24.4 in (620 mm) (HxWxD with handles)
  • 12.9 in (327 mm) x 17.9 in (454 mm) x 24.4 in (620 mm) (HxWxD without handles)
Weight
  • DPO714AX: 84 lbs. (38.1 kg)
Warranty
  • 1 year standard

Want help or have questions ?

Contact us
Scroll to Top